Books, Films, Magazines & Videos

How A Suit Should Fit

How A Suit Should Fit

You can hear it every time a suit is discussed – what matters most is the fit. The problem is, apart from shoulder width, sleeve and pants length the details are not really discussed. Therefore, we thought it was time to create a comprehensive Guide on How A Suit Should Fit.


We start with part I, where we discuss all the basics and in the part II, we go to more advanced things so you know what to look for in a proper suit and when to leave it behind.

Unfortunately, it is impossible to properly describe the fit of a suit without a moving picture. Therefore, it is essential to watch the video, even if you normally prefer to read.

 

Why Should You Care About Fit? Comfort & Looks!

First of all, a well-fitting suit is almost as comfortable as wearing a sweater and sweatpants. Second of all, it makes you really stand out from the crowd and people will look at you and think you’re really dapper but they can’t pinpoint that it’s a fit of your suit.

Why Does A Properly Fitting Suit Make You Look Better? Symmetry!

The answer is actually quite simple; a suit hides everything that’s asymmetrical about your body and hides all the flaws, at the same time highlighting features such as your shoulders and your chest, giving you a natural v-shape that’s very flattering and attractive. So if you feel more comfortable, it has an impact on the way you look, the way you stand, and the way you walk. Everything says I’m more confident and that little extra notch will help you to land that job or get that respect that you deserve.

So What’s The Big Problem? 99% Of All Suits Don’t Fit

When I’m on the street, I see 99% of the men wearing suits that fit not so well or terribly ill and even sometimes when people tell me “Oh I found a suit that fits like a glove”, chances are their standards are not high enough so they just are satisfied with something that is not really a proper fit.

What Exactly Is A Suit? Matching Pants & Jacket

A suit means it is a matching garment of jacket and pants made of the same cloth. You can add a vest, you don’t have to, if you do it’s called a three-piece suit; if not, it’s called a two-piece suit. It’s double-breasted or single-breasted, doesn’t matter. The term suit comes from the French “suivre” which means to follow. That means the jackets follows the trousers or the pants follow the jacket.

Sven Raphael Schneider wearing suits

Sven Raphael Schneider wearing suits

So the pictures you can see above are suits; matching pants and jacket. What you can see here, is a combination, for example with a blazer or a sport coat or a tweed jacket.

Aspects Of A Well-Fitting Suit Jacket

collar shoud fit snuggly around your neck

collar shoud fit snuggly around your neck

Collar

The first thing you can look at when you buy a suit or have a suit made is the collar of the suit. It should fit snugly against your neck without being overly tight and it should never stand away or gap. If you have a round shoulder the way I do, chances that your jackets gap more easily are much higher than if you have a straight posture. Because of that, you always have to go to the alterations tailor or talk to your made to measure provider or tailor and make sure you get a proper fit.

The problem is when you stand, most jackets look good, the issue starts when you start moving when you lift your arms and you still want that jacket collar to sit tight against your shirt collar. So your natural movements, sit down, move your arms, drink something from a bottle, maybe eat, and if it stays in the back and it stays by your shirt tips, you know you’ve got a well-fitting collar. Even if you have an ill-fitting collar, the good news is it can be fixed by an alteration tailor so just pay attention to that. It’s not an easy fix but it can be done.

shoulder should be slightly hanging over to give you a broader look

shoulder should be slightly hanging over to give you a broader look

Shoulder

Ideally, you want the shoulder seam on top to be just slightly extended from the bone on your shoulder. Unlike a dress shirt which ends exactly at the bone, you want it to be slightly hanging over to give you a broader look and enable a range of movement because when you have multiple layers of fabric, the outer layer always has to be a little longer to be comfortable, you want the top part  at your shoulder to be smooth and not puddling.

poor fitting shoulder

poor fitting shoulder

If you encounter a jacket that has puddles, it’s too big, you should leave it behind because changing it is almost impossible. You also have a poorly fitting shoulder if you see huge dents right underneath the top of the padding and your actual arm. It makes you look more like a football player and you should always leave those suits behind.

On the other hand, if your shoulder is too tight, you’ll have a hard time moving forward and moving your arms naturally because it constricts you in the back. If you’re unsure, you can always measure your shoulder width from bone to bone and at about half an inch or a centimeter to get the right shoulder width that you should have in a suit.

Armholes

Most armholes in suits are too big because suits are industrially made and they want to have a one size that fits it all, the problem is if you have huge arm holes, it may seem like it’s more comfortable but it actually isn’t because as soon as you move, your entire jacket moves with you and constricts you. On the other hand, if you have a tight armhole that ends just below your armpit, you can easily move and comfortably wave for a cab and look dapper all day without feeling constricted. If you have an armhole that is too small, you’ll see wrinkles on the sleeve head and it also constricts you when you reach forward because you reach a point here that just makes it impossible to reach forward.

too tight armholes

too tight armholes

If you go bespoke or made me to measure, you can sometimes ask to give you a little more space in the front the arm hole, in the back, and have it very tight on your armpit; that way you get the range of movement, you get a nice look, the fabric drapes well and it almost feels like a sweater.

bone to bone measurment

bone to bone measurement

Chest

When it comes to a good fit of the chest it’s always easy to see because some chests are fuller and they have more fabric that drapes well and for that, it’s called Drape. On the other hand, you can have a very lean trim cut chest that is sometimes more popular with slim fit suits but it will never have that same amount of drape. The advantage of folds is that it makes your chest look bigger and it gives you that V shape that’s very attractive to the opposite sex.

In the 1930s, you had drape cut that was very extreme. I think the suit I’m wearing is a little more constricted but you can still see I have excess fabric and it provides a nice silhouette of my body. When your chest width is too tight and you move around, you can see your lapel break a little bit simply because there’s not enough room, also you likely see vertical pleats in the front and in the back.

Ideally, you should always measure your chest at the widest point. In Europe, a size 50 means you double it by 2 which means it’s a hundred centimeters. If you measure 100 centimeters, you probably have a size 50, should be right for you. If you’re in the US and you’re a size 42 regular, for example, it means the chest should be 42 regular.

Now that being said, manufacturers have different ideas of how a suit should fit and sometimes I found old English suits in a size 42 which were way too baggy on me versus other suits are 44 and they’re way too tight. So don’t just rely on the actual number but measure the jacket, measure your chest, and ideally try it on.

side vents

side vents

Vents

Today, most jackets have side vents, they are the most flattering. Ideally, you want high long vents that end exactly where your jacket pocket ends. The last hundred years, center vents have been in and out of fashion but originally, they were meant for horseback riding so unless you wear a jacket on the back of a horse, skip it.

In the 20s and 30s, you would often see ventless jackets and it’s still popular for evening wear because it gives you the ultimate clean line, however, if you sit a lot or if you sometimes put your hands in your pocket, side vents are much more flattering. Personally, I have a big bump and because of that, it’s very easy for vents to gap but you should avoid that. If you have a big bum, you should pay particular attention to keeping your vents closed and I know that because I have one. If you go ventless and it’s too tight, you can actually feel it it’s constricting you and chances are, you will see some wrinkles above your bum.

proper jacket length

proper jacket length

Length

It’s very important to get it right in the first place because even though you can physically change the length of the jacket, it will always look off if you do so. The proportions will simply not work and the location of your pockets will seem off as well as the buttoning point and therefore if you encounter something that is too short or too long simply leave it behind.

incorrect length of a jacket

incorrect length of a jacket

What Exactly Is Too Short Or Too Long?

Most tailors will have jackets that are slightly longer in the front than they are in the back because it provides a flattering silhouette. Sometimes they also do it very flat and that’s something you usually only find at bespoke because even made-to-measure can’t adjust the patterns to that.  Also, if you have a round back, for example, the way I do, you need to have extra length in the back to get the right proportion. Traditionally, the proper jacket length always meant that at least your bum was covered.

In recent years, especially with younger men, jacket lengths have become a lot shorter and sometimes you can find older gentleman complaining about that and they say it looks like you got a jacket from your younger brother.

bum covered jacket length

bum covered jacket length

The proper way to look at jacket length is into an optical relation to your entire height and to your pants. So ideally, if you stand and you look at the profile from the side the length from the back of your neck to the bottom of your jacket should be exactly the same length as from the bottom of your jacket to the bottom of your pants. Obviously, you need someone to help you with that because you can’t measure it yourself but if you get those proportions exactly one-to-one, you will always look very well dressed and dapper and timeless.

The problem with going with the jacket is too long means that your torso appears longer and your legs shorter which makes it look goofy. Same thing the other way around, if you have very long legs and a short torso, it just seems off. The great thing about a tailored suit is that it can hide certain flaws. Personally, I have a long torso and short legs but using the suit and using those one-to-one proportions, I can look exactly the same as someone who has long legs and a short torso or someone who has regular long legs and a regular long torso.

Sleeves

A sleeve should always hang very nicely without any wrinkles. If you see all the wrinkles chances are the sleeve pitch is wrong which means the way and the angle the sleeve was set in, that can be fixed by a tailor but they have to be quite skilled. Of course, the sleeve length is often a subject of long discussions, and there are all kinds of opinions and if you want to learn more about them please check out our sleeve length video where I explain everything you need to know about sleeve length of a jacket.

extra fabric on the sleeve for better range of movement

extra fabric on the sleeve for better range of movement

One thing that’s often not talked about when it comes to sleeves is the upper sleeve. If you want to have a great movement and a comfortable jacket, you need some extra fabric on the top of your sleeve simply to reach forward, otherwise, if it’s too tight, it may look great when your arms hang down but as soon as you move, you’re constricted in that area. It’s a fault  I see a lot in ready-to-wear jackets to this day, especially now that slim fit suits are trendy. Going made-to-measure or bespoke has a great advantage that you can specify those things and a small armhole in combination with a wider upper sleeve will provide you a much more comfortable jacket that looks the part.

Stay tuned for part II and make sure to watch the video.

snobbism

Snobbism, or a Desire to Show Up & Why You Shouldn’t Be a Snob

You have struggled hard to live the life you always wanted to have – and then you start to brag about your clothes, your car or your house? That’s not quite how a gentleman would do it. As Cary Grant once said, “beware of snobbery: it is the unwelcome recognition of one’s own past failings.” In this article, you’ll learn all about the snob, who he is and why it’s better not to be one. Read more

Jeeves & Wooster Analyzed – The Suits & Clothes of Jeeves

Recently, we examined the style of P.G. Wodehouse’s Bertie Wooster in the 1990s UK television series Jeeves and Wooster. As the show title suggests, Jeeves and Wooster are a comedic pair, like Laurel and Hardy, Abbott and Costello or Laurie and Fry, the actors who played them, so we can’t rightfully talk about Bertie’s style while ignoring Jeeves!

Although Bertie wears multiple outfits in each episode, Jeeves appears in the role of a valet throughout the series and is therefore nearly always in his valet’s uniform; as a servant, he doesn’t have the luxury of a varied wardrobe. In fact, he barely has a first name (revealed after more than 50 years to be Reginald). However, we can still derive a number of style ideas from what he wears and from the contrast between the two men.

Jeeves

Jeeves

Read more