The Anatomy of a Suit Jacket: A Comprehensive Vocabulary

When you buy something using the affiliate links on our site, we may earn a small commission.

Suits come in two basic flavors–single and double breasted–but, beyond that, a suit jacket is one of the most complex tailored items out there, made up of numerous component parts that we may not think about that much. However, each aspect of a suit’s design adds something to how it looks on you. In this article, we’ll review the anatomy of a suit, with an emphasis on the important terminology used to describe its various features.

Table of Contents
  1. Outfit Rundown

What is a “Suit”?

Though it may seem obvious, it may be worth mentioning first of all that a suit is comprised of a jacket and pants in matching fabric that forms a set, hence its name in French: complet. As Sven Raphael Schneider has explained elsewhere, the modern English word comes from the French suivre, “to follow,” with the pants following the jacket (or vice versa). When I’ve worn a sport coat and non-matching trousers, I’ve received compliments on my “suit,” which is technically incorrect, though as a gentleman, I accept the compliment without correction. One thing this error does reveal is the primacy of the suit jacket–the pants are mostly an afterthought–and we too will focus our attention on the jacket where most of a suit’s defining features are concentrated.

Sven Raphael Schneider wearing well-fitted suits.
Sven Raphael Schneider wearing well-fitted suits.

When I first started buying suits as a younger man, I thought they were all essentially the same, and in my mind, I was picturing the typical cut of a suit sold in Macy’s—loose fitting yet quite structured, with padded shoulders and a boxy cut. This never really sat well on my body, so I ended up avoiding suits altogether–until I learned to see all the individual elements that go into their design. Just like many working mechanical parts and design features come together to make a Ferrari look and run like a Ferrari and a Toyota look and run like a Toyota, not all suits are alike. I was amazed to see how a change to just one element of a suit’s design can affect its overall look and style.

Lapels

A suit’s lapels are a major factor in shaping the impression of a suit, as they are a prominent design feature right in the center and close to eye level. Lapels can be defined as flaps of fabric on each side of the suit jacket immediately below the collar and folded back. This “folding back” is best captured in the French name revers, also used in Italian, which emphasizes a turning back of the fabric direction.

Of the two lapel possibilities on a suit (excluding the shawl lapels on dinner jackets), the more common is the notch lapel, where the bottom of the collar meets the lapel at an angle that creates a v-shaped notch (called the cran in French tailoring terminology). The Brits see this as a “stepped lapel” while Italians call it “toothed” (a dente); you can picture two teeth on a saw or of a shark. Notched lapels only appear on single-breasted suit jackets.
 
Definitely not a suit you should b e wearing for black tie optional
Notch lapel jacket with Fort Belvedere accessories
Shantung Silk Striped Two Tone Bow Tie Bronze Orange, Green, Cream

Fort Belvedere

Shantung Silk Striped Two Tone Bow Tie Bronze Orange, Green, Cream

A photo of a Light Lavender Geranium Silk Boutonniere Lapel Pin Flower

Fort Belvedere

Light Lavender Geranium Silk Boutonniere Lapel Pin Flower

Silk Pocket Square in Brown with Blue, Green, Red Large Paisley Pattern- Fort Belvedere

Fort Belvedere

Silk Pocket Square in Brown with Blue, Green, Red Large Paisley Pattern

 
Peak lapels can appear on single-breasted suits too but are de rigueur with a double-breasted. When I first started looking at suit styles some years ago, I found it difficult to distinguish the peak lapel from the notch lapel in some cases because the peak lapel can also form an opening where it joins the collar. This spot–the meeting point of collar and lapel–is called the gorge. The key distinction is that the peak lapel ends in a point that juts out beyond the collar, which the Italians call a lancia or a punta: spear or point. Peak lapels are more formal than notch lapels and project a greater sense of authority, which is why they often featured on power suits as well as on tuxedos and morning coats. For this reason, wearing peak lapels can be a daring workplace move unless one is already in a position of power.
 
Gianni Agnelli projecting authority in a peak lapel suit.
Gianni Agnelli projecting authority in a peak lapel suit. [Image Credit: GQ]
 
Whether there is a peak or notch lapel, the angle of the gorge and the shape of its opening have been subject to multiple variations, past and present. A higher gorge lapel with peaks angled upward, for example, can create an added sense of height in the wearer, something achieved by Cifonelli suits. However, as a general rule, the gorge should line up with your shoulder if you took a ruler and laid it horizontally from the there to your arm.
 
bone to bone measurment
Gorge height often meets your shoulder line.
Knit Tie in Solid Rust Orange Silk - Fort Belvedere

Fort Belvedere

Knit Tie in Solid Rust Orange Silk

Orange, Green, Blue, Yellow, Silk Wool Medallion Pocket Square

Fort Belvedere

Orange, Green, Blue, Yellow, Silk Wool Medallion Pocket Square

Another way to think about this is that the gorge should rest on your collarbone. Still, gorge height can vary. Suits from the early to mid 20th century tend to have a lower gorge, and it has begun to migrate upwards in recent years toward the top of the shoulder, so it is sometimes barely visible from the front. The latter appear especially in Italian tailoring, including Sartoria Rossi and Cesare Attolini. A low gorge can be seen as either dated or classic depending on your perspective while a high gorge can be considered either rakish because it creates the impression of a broader chest and greater height, or a mere whim of fashion.

A contemporary Attolini suit with a high gorge; Gary Cooper in the late 1930s wearing a suit with a low gorge
A contemporary Attolini suit with a high gorge; Gary Cooper in the late 1930s wearing a suit with a low gorge [Image Credit: L- Pinterest], R- Old Magazine Articles]
 
More important for the appearance of a suit jacket than the gorge placement is the lapel width, which can vary from skinny (in the range of 2 ½ inches) to rather wide (4 inches or more). Lapels at opposite extremes, being either very thin or very wide, are subject to the vagaries of fashion and can make a suit look strange or unbalanced. J.CREW and Bonobos are a couple of American brands that promote slim lapels (and often skinny ties to go with them) while the recent drive for #menswear has pushed wide lapels as a way to be more rakish or to show contemporary sprezzatura style, especially from Italian makers like Orazio Luciano and Sciamat.
 
A J.CREW Ludlow suit with skinny lapels compared to an Orazio Luciano suit with wide lapels.
A J.CREW Ludlow suit with skinny lapels compared to an Orazio Luciano suit with wide lapels. [Image Credit: L- DCE.Edu, R- Orazio Luciano]
 
As a rule, notch lapels in the area of 3 ½ inches (or perhaps 8 to 10 cm) look good on most men, as they balance with the average tie width of 3 to 3 ½ inches. Peak lapels tend to be wider (4+ inches) or, at least look that way. Wider lapels have the effect of amplifying the appearance of the chest at the expense of the shoulders, while narrower lapels promote the impression of wider shoulders by leaving space between the lapel and the arm; if the lapel fills that space, your shoulders can seem more narrow. Above all, though, it is important to make the choice based on your body type: thin men can look more proportioned with narrower lapels, and big and tall men look better with wider lapels. Narrow lapels on a big man make it seem like he’s outgrown his childhood suit while big lapels on a thin man appear like he’s wearing something from dad.
 
Lapels can be either cut as a fairly straight line from top to bottom or with a curved outer edge. The first creates the impression of a “V” on the chest while the other tends toward a light “U” shape. When present, belly curve is most visible on 3-roll-2 jackets (discussed below) and on double-breasted suits. This convex curve creates what is known as the lapel belly, which can appear more casual or relaxed. On the other hand, straight lapels may project more of a serious and authoritative look.
 
A Pini Parma jacket showing the curve of a lapel belly. Notice how the large lapels reduce emphasis on the shoulders.
A Pini Parma jacket showing the curve of a lapel belly. Notice how the large lapels reduce emphasis on the shoulders. [Image Credit: Pini Parma]
 
Lapel belly is sometimes confused with lapel roll, which is a folding or “rolling” at the lower part of the lapel that raises the lapel away from the chest, somewhat like the pages of an open book on a table. A strong lapel roll will create in a hollow under it. Lapel roll is often prized as a sign of bespoke tailoring and also for the rakish elegance it conveys.
 
Lapel hollow
Hollow formed under the lapel roll

Suit Buttons

Lastly, there is the matter of lapel length, which directly relates to the second aspect of suit anatomy affecting the appearance of a suit: the buttoning point or button stance. A suit’s lapel ends at the point where you button it, so a single-breasted suit with three buttons will have a shorter lapel and a higher buttoning point than one with two buttons. A lower button point elongates the lapels and therefore makes the wearer appear leaner and taller. That’s why men who are very tall often choose three-button suits to counterbalance their height. Contemporary suits generally favor higher buttoning points, which creates a broadening of the chest if you are lean. Those who carry more weight will prefer a lower buttoning point because it has a thinning and elongating effect. A lower top button also pleases traditionalists because it presents more of a “business suit” look.
 
Buttoning points compared
A low buttoning point on Benedict Cumberbatch’s one-button jacket compared to a higher one on Sven Raphael Schneider’s three-button jacket. [Image Credit: L- Daily Mail]
 
Three-roll-two single-breasted jackets also referred to as having 2.5 buttons, have become quite popular in recent years and are typical of Neapolitan tailoring. In Italian, they are described as “una giacca tre bottoni stirata a due” (a jacket with three buttons pressed to two) because the lapel is gently ironed to incorporate the top button into the fold the lapel. This top third button is never meant to be closed, but the profile of the lapel that results is one that shows an elegant roll.
 
three-roll-two glen check with contrast button gimp.
The author, Dr. Lee, in a three-roll-two glen check with contrast-stitched button gimp.
 
When we move into the realm of double-breasted suits, things seem considerably more complicated as button possibilities are usually provided in terms of numbers like 6×2, 6×3, 6×1 or 4×2 double-breasted suits. The first number represents the total number of buttons on the front, with the second number indicating how many of those can be fastened. The 6×2 is most common, perhaps followed by the 4×2. Even when there are two functioning buttons, one usually closes only the top one. The more buttons the more formal, with the 6×3 resembling a peacoat or naval uniform and four button versions, often appearing rather laid back. It’s fascinating to see how the different permutations affect the look of the suit; you can make a game of looking at photos of double-breasted suits and labeling their button combinations.
 
Various double-breasted jackets, also possible as suits: a classic 6x2, a 4x2 and what looks like an 8x2.
Various double-breasted jackets, also possible as suits: a classic 6×2, a 4×2 and what looks like an 8×2. [Image Credit: Fashion Wanders]
 
Sometimes forgotten are the buttons on the suit sleeves. Usually, there are four, but some summer jackets show three. Kissing buttons, where the sleeve buttons touch one another or overlap slightly, have become particularly popular. Also nowadays, the explosion of interest in refined tailoring has meant that these are more often working buttons on ready-to-wear suit jackets than they used to be. You can open the bottom one or two, either to show off that you have a quality tailored item or to appear rakishly nonchalant, but I don’t find this an important feature to have. In fact, functional sleeve buttons make sleeve length adjustments difficult for your tailor. This feature did have a functional purpose at some point when doctors “back in the day” used to unbutton their suit cuffs, roll up their sleeves and do things like amputate limbs or deliver babies. Thus, it is still sometimes described as having surgeon’s cuffs.
 
Kissing buttons
Three kissing buttons on a summer jacket

Finally, we include the lapel buttonhole here, as it originally was designed as a way to fasten your collar under your neck as a remedy against bad weather, that is, until the button on the opposite side disappeared from the design. Now, this function is vestigial, but the hole has become the perfect place for a boutonniere flower for a dash of added style. Hand-sewing of the buttonholes, including the one on the lapel, is often a hallmark of a bespoke or otherwise high-quality suit. The most popular is called the Milanese buttonhole because of its origins among tailors of that city; this involves fine stitching of the gimp–the reinforcing trim threads of the buttonhole–resulting in an added bit of ornamentation.

Shoulder Terminology

Much can be done by a tailor with a suit’s shoulders to influence its final appearance. British tailoring traditionally favors a structured shoulder with padding that creates a stronger, masculine look: imagine a pinstripe suit worn by a banker. You will also see this in French power suits and Italian tailoring from Milan and Florence. It is possible to create the illusion of broader shoulders through constructing an extended shoulder, which projects the fabric of the shoulders out a bit further than the arms through the assiduous use of padding.

Structured shoulders on British tailoring
Colin Firth in Kingsman wearing a classic British suit with padded shoulders [Image Credit: Pinterest]

Another option, with light padding, is the roped shoulder of Neapolitan style, where the sleevehead (top of the sleeve) is attached to the armhole a bit higher than the shoulder, creating a ridge or “roping” detail. In Italian, the name is spalla con rollino (“shoulder with a little roll”). Roping can also be part of a pagoda shoulder, which is slightly concave due to some padding, which results in an elegant sweep down from the collar and back up at the arm, like the roof of a pagoda. In Italian, such a shoulder is actually termed a spalla insellata (saddle), as it curves like a saddle. This creates a very bold and unique look, which is not for everyone!

A suit with pagoda shoulders and roping.
A suit with pagoda shoulders and roping. [Image Credit: Blogspot]

If we go without any padding, we end up with what is termed a soft shoulder or natural shoulder also most typically seen in Neapolitan tailoring. The result is a more relaxed look that Bloomberg has called “risky trend” if you work in a strict business environment but ideal to raise business casual to a new level or for weekend wear. The absence of padding creates a spalla camicia (shirt shoulder), where the arm of the suit jacket lies like a shirt sleeve, which, of course, is also unpadded.

Suit jacket shoulder guide

All soft Neapolitan shoulders, including those with light padding, can also feature additional shirring of the sleevehead (called a mappina or “little rag”). These are little puckered pleats that show the tailor’s handwork and  are evident in most images of spalla camicia suit jackets.

Spalla Camicia vs. Con Rollino
Spalla camicia vs. con rollino shoulder details

Pockets

Every suit jacket will have at least two kinds of pockets. One, on the upper right side, is the breast pocket, into which you can (and should) place a pocket square. Again, the Neapolitan tailors have done something unique here, creating a breast pocket that is curved like a little boat (barchetta) for a unique hit of style.

Jacket pockets formality scale
Jacket pockets formality scale

In terms of the larger pockets, there are three possibilities, and which one you have plays a key part in determining how casual or formal a suit is. First, we have patch pockets, which are sewn onto the outside of the suit as visible patches; these immediately signal a suit is more casual, perhaps a summer linen. These may also appear as a breast pocket, which is really informal on a suit. Flap pockets are hidden beneath the surface of the suit jacket except for a flap of cloth covering them. These are the most common or default suit pocket type. Third, you might encounter jetted pockets, which are also beneath the surface of the jacket but have no covering flap. These can appear on suits, as they are highly formal, but are more common on dinner jackets. When you buy a new suit, your pockets will be basted or sewn shut. As the stitching is hidden, some men keep the pockets closed to avoid deforming or warping the pockets by putting things in them, especially patch pockets.

On some flap pocket suits, you will also find a third, slightly smaller, ticket pocket on the left side above the regular flap pocket. This was originally designed to hold train tickets but can be used for various small items.

A gray suit with flap pockets and ticket pocket
A gray suit with flap pockets and ticket pocket. [Image Credit: James Bond Lifestyle]

The Body Panels of a Suit

Given how much is going on related to the shoulders, lapels, buttons and pockets on a suit, it is easy to overlook the body panels themselves, which can also contain variations. A primary consideration is how much fabric there is in the chest area, also known as the drape. A suit jacket with a lot of drape has a fuller cut with more room in the chest. The look differs considerably from the more fitted suits that are in style now but have returned at places like The Armoury and Ring Jacket because suits with drape are seen as more laid back as well as comfortable.

Suit drape
A drape suit from the 20th century and a contemporary Ring Jacket suit with some drape to the chest area. Darts are visible in the right image as well.

Also on the chest, you are likely to have darts–vertical seams running down each side of the panel, usually ending above the side pockets. They’re designed to add some contouring to the shape of the suit jacket and are present in most modern suits unless you have a true American sack suit, which is meant to lie loosely on the torso, like a sack, truly the antithesis of contemporary suiting style.

Moving down the jacket, we have the question of waist suppression. As the name suggests, this is how much the waist area of the suit is tapered in, creating the impression of wider shoulders by slimming the waist. Waist suppression is related to drop, which is a number indicating a difference between the size of your suit jacket and the waist size of your suit pants. For example, if you have a 40 jacket size and a 34 waist size, this is a standard “drop 6” suit. If the suit is cut slimmer, you may see it referred to as a “drop 7” or even “drop 8,” the latter being a 40 jacket and a 32 waist. Even though the number includes consideration of the pants size, the jacket itself in a drop 7 or drop 8 suit will be slimmer than one in a drop 6.

Maslow often wears single-breasted jackets with cutaway open-front quarters
Single-breasted jackets with cutaway open-front quarters [Image Credit: Amazon]

At the very bottom of the suit, we have the quarters, the two flaps of the jacket that meet at the waist button. These can be either open or closed, meaning the flaps can lie nearly straight down (closed quarters) or spread apart in a “flyaway” or “cutaway” fashion (open quarters). The effect of open quarters is to make the lower body look wider, so suits with this feature may be ideal to balance out very broad shoulders. On the other hand, closed quarters maintain emphasis on the shoulder because the hip area stays narrow.

Taken together, the quarters form part of the suit skirt, which comprises all of its lower half. On the back of the skirt there would usually be one or more vertical slits, known as vents. These likely originated to enable a jacket to sit well when riding on horseback. Nowadays, they serve the same purpose of keeping the back of your suit from rumpling wherever you sit, and, for all intents and purposes, you’d want to choose a double vent rather than a single center vent or none at all. Besides keeping your suit looking neater when you sit, a double vent keeps your rear end covered if you put your hands in your suit pockets. What’s more, a single vent is usually a hallmark of a cheap suit because they are less expensive to make. The only time you should have something other than a double vent is when wearing a dinner jacket or tuxedo, which is usually ventless because this creates a sleek, streamlined silhouette. Of course, you can have the same slimming effect if you buy a ventless suit, but you would have to be willing to sacrifice the advantages of having vents.

side vents
Silhouette of double vents on a suit

The Hidden Bones of a Suit

As with human anatomy, some of the anatomy of a suit lies beneath the surface. First, there is the lining, which should be made from cupro, a natural material, rather than polyester. Bemberg is another name you may hear related to lining; it’s just a specific high-quality brand of cupro. The lining adds warmth as well as structure to a suit jacket, helping it hang well on the body, smoothing it out by placing a thin layer between the suit fabric and your shirt. Gents with dandy style may choose linings in colors that contrast that of the suit while adding panache. Since lining does add thickness, summer jackets often contain less lining and are either half lined (top, side panels and sleeves), quarter lined (top and sleeves), or even totally unlined, depending on how much there is on the inside. Usually, regardless of how little overall lining there is, the sleeves of the jacket would remain lined for ease of slipping the jacket on and off.

While you can see the lining of a suit, the canvas is invisible, a layer made of wool and horsehair (for stiffness) that sits between the suit fabric and the lining. The purpose of the canvas is to help the suit hang optimally and conform it more to your form. In fact, you’ll often hear it said that canvas actually improves the look of a suit over time as the heat of your body shapes it to fit. The canvas is stitched loosely in between layers so that it moves with you.

Suit canvas
Exposed canvassing on suits [Image Credits: L – Suitablee, R – Pinterest]

Similar to the lining, you can have a suit that is fully canvassed or half canvassed. The former covers both front panels of the suit and the lapels. A half canvas covers just the upper chest and lapels; it doesn’t extend down to the quarters. The tailoring work involved with canvassing is intensive and costly, so full canvas will be more expensive. Cheaper suits will have only a fused interlining that is glued in between the suit fabric and lining, which has a tendency to warp and bubble over time due to delamination (unsticking of the glue). Thus, it is crucial to invest in a suit that is at least half-canvassed and avoid fusing.

Bubbling of a fused interlining due to delamination.
Bubbling of a fused interlining due to delamination.

Conclusion

Once you have knowledge of what makes up a suit and the vocabulary to describe these features, you can choose a suit that suits you—especially in terms of your age and body type. It takes some time to see the elements when you begin the process of wearing tailored clothes, but learning about them is the first step to looking and feeling your best in a suit. It is important to observe that the various choices in the design of a suit not only determine its anatomy but help to enhance yours as well.

Outfit Rundown

I’m wearing a three-piece suit that was custom-made for me. It has medium-wide lapels it is a one-button jacket. Because of that, the lapels didn’t need to be that wide. It’s a three-piece suit with a matching vest which is double-breasted and because of that, I wore a jacket usually unbuttoned.

Sven Raphael wearing a three-piece custom-made black suit
Sven Raphael wearing a three-piece custom-made black suit
Eagle Claw Cufflinks with Deep Blue Lapis Lazuli Balls 925 Sterling Silver Vermeil Gold - handmade by master jeweler - Fort Belvedere-Cover

Fort Belvedere

Eagle Claw Cufflinks with Lapis Lazuli Balls – 925 Sterling Silver Gold Plated

White Initial Pocket Square - Hand-Embroidered in Italy

Fort Belvedere

White Initial Pocket Square – Hand-Embroidered in Italy

Light Blue Veronica Persica Boutonniere Buttonhole Flower

Fort Belvedere

Light Blue Veronica Persica Boutonniere Buttonhole Flower

Madder Silk Tie in Bottle Green Macclesfield Neats Blue Orange Pattern - Fort Belvedere

Fort Belvedere

Madder Silk Tie in Bottle Green Macclesfield Neats Blue Orange Pattern

Shadow Stripe Ribbed Socks Charcoal and Orange Fil d'Ecosse Cotton

Fort Belvedere

Shadow Stripe Ribbed Socks Charcoal and Orange Fil d'Ecosse Cotton

I’m combining it with a white dress shirt with French cuffs and cufflinks in silver and lapis lazuli. They work well with a necktie which is made of English madder silk. The pocket square is a white linen pocket square. It’s very formal and goes well with the suit fabric which has a slight orange stripe which is picked up in the socks which are shadow stripes in orange and charcoal. They provide enough contrast with the shoes and pick it up so it’s a harmonious outfit. I opted for single monk straps with a wing tip from Crockett & Jones on the lapel. I have a Milanese buttonhole which is hard to see though because I’m wearing a boutonniere. On my ring, I’m having a lapis ring in sterling silver which matches the cufflinks.

Reader Comments

  1. Thank you kindly for this wonderful piece. I greatly appreciate the detail of your pieces such as this. I have noticed that hats are making a comeback and think an article on men’s head wear/gear would be great. Regards

  2. Another great article!

    The Pini Parma jacket looks terrible — single breasted, peak lapels and patch pockets. What else could go wrong?

    TT

    1. Interesting point, twotone. I’m a fan of Pini overall, but it is unconventional to say the least to see a patch pocket with peak lapels.They’re pushing the envelope there.

  3. A wonderful and informative article; but having said that, I must take a small issue with the origin of the vent style. My teaching was that the difference in vent design has nothing to do with the cost of manufacture, but originated in English suits and country jackets (i.e. tweeds). Side vents were found only on suits for city wear. The design allowed for easy entry of the trouser side pockets with little rumpling of the jacket.

    Originally, country jackets (usually tweed) were of a softer fuller cut and had no vent(s) at all. However, the act of sitting in a saddle caused the rear of the jacket to “ride-up” on the wearer; the single vent became the answer. It allowed the wearer more comfort and covered the saddle cantle and roll. Today, modern mass produced jackets may have a cost factor, but ask a tailor and he will say their most pricy jackets will be made at the customer’s request and they still have requests for both designs in suit jackets… just my 2ȼ.

    1. Thank you for reading and contributing, Tim. Indeed, as I mention in the article “These likely originated to enable a jacket to sit well when riding on horseback”; thank you for presenting further details and elaboration on the connection. Also, just as you say, they’ve been unfortunately come to be associated with cheap suits, though I’m sure excellent single-vented jackets can be found at higher cost.

  4. Well articulated and highly informative. Your coverage on lapels didn’t cover the “shawl lapel”. I really appreciate this piece. Makes a good read.

    1. I suppose I am treating the shawl as more of a collar than a lapel type. That maybe semantics or my personal angle on it.

      1. Showl lapel or collar ought to be reserved for Dinner Jackets.

        Sadly, occasionally they apepar on business suits and confer on to the unaware wearer the cheapish air of provincial Tango teachers…

  5. The entire read on “Anatomy of a suit” was indeed interesting and truly informative I appreciate getting knowledge on the orgin of the functionality of various parts of the suit such as the lapel button to protect the wearer from enclimate weather and terminology like “drop” reference between jacket and pants thanks for a wonderful article.

  6. Wonderful piece! Thoroughly enjoyable and interesting.

    I’d like to challenge one bit of the article where it discusses how a lower buttoning point gives an impression of added height to the wearer due to an increase in lapel length. I’ve always been of the opinion that a higher buttoning point gives a greater sense of height. Here are two suits I found to make my case: https://i.imgur.com/XSXAxjs.png

    Both are very similar in build. The first one, of course being a bit more modern in construction and having a higher buttoning point and gorge. Since the buttoning point is higher you do indeed have a shorter and slightly flatter lapel V shape that ends further up the body; this effectively means that less shirt and tie are visible and are more concentrated towards the top of the suit. I think that this functions to draw an individuals attention further up the wearer making them seem taller, much how like a pocket square or tie might. Another benefit of this placement I think is that since the buttoning point is in the absolute narrowest part of the suit and the lapels are shorter, this exaggerates even further the contrast between a narrow waist and a broad chest + shoulders which to me is a very desirable and attractive trait.

    I am a young and short man and when I wear my suits that have this more modern button placement I feel like I look not only taller but more masculine/fit compared to when I wear a suit more like the right one in the image. Would love to hear what you have to say about this theory!

    I have a question also; If a suit is half-canvased does that mean that the lower half or quarters are fused/glued and prone to the delamination you mentioned or does this behavior only really occur in the upper body?

    Cheers!

  7. Suit is a gentlemen’s code and it needs to be perfect in all aspects.It is an Elite attire and it describes ones personality too.

Comments are closed.