What Men REALLY Wore in the 1910s

When you buy something using the affiliate links on our site, we may earn a small commission.

In recent years, many TV and film productions set in the early decades of the 20th century (like Downton Abbey, Peaky Blinders, and more) have garnered popular and critical acclaim, in part for their smart menswear ensembles! However, are the men’s fashions depicted in these shows really accurate? Let’s turn back the clock 110 years and look at what men actually wore in the 1910s!

What Men REALLY Wore in the 1910s

Of course, in different countries, men wear different things based on climate, culture, or fashion. In this post, we’ll focus mainly on American fashions and compare them to European styles. So, without further ado, let’s jump in headfirst.

Hats (Top Hats, Bowlers, and More)

And we do mean, “headfirst,” starting with hats! Yes, you heard right. Men back then would always wear hats, and not wearing a hat was about the equivalent of going outside today in your underwear and undershirt.

Men wore a variety of hats in the 1910s.
Men wore a variety of hats in the 1910s.

However, that’s not to say that every man could afford a nice hat, wore a nice hat, or bothered to wear it. A hat is not a hat, and men in the 1910s wore very different ones for different reasons.

Top Hat

Let’s start with the most formal one, the top hat. It’s basically a tall hat with a flat top and a round brim. It was covered in shiny silk plush fabric that is very fine, and it was definitely a hat of the upper-class.

Raphael wearing a top hat
Dashing Raphael in a top hat and white tie outfit which consist of some Fort Belvedere accessories.

Sadly, this material has been discontinued since the 1960s. So, you can’t make those new ones anymore. Because the material is no longer accessible, vintage top hats in large sizes can sell for thirty to fifty thousand dollars.

Silk plush is a very fine material. It was worn by upper-class men that could afford it, not by the middle-class or the working-class typically.

A top hat used to be worn for regular day wear, meaning just to go about town. In the 1910s, that had changed, and top hats were more reserved for formal morning wear or evening wear. It was popular with politicians, aristocrats, the nouveau riche, and some middle-class people who had ambitions to become upper-class.

The top hat was an upper class hat.
The top hat was an upper-class hat.

While all top hats look alike for many people today, it’s all about the nuances and the detail. For example, in this picture, you can see a different amount of brim curl and how high it is. Also, look at the head itself. Some are wider at the top than in the middle. The height was also different.

After the 1910s, top hats got slightly more simple in their design and also slightly shorter. When we say top hat, we mean the stiff non-collapsible top hat. There is also a collapsible top hat, also known as opera hat or chapeau claque.

Opera Hat
A collapsible Opera Hat

Many people remember having seen those in vintage movies. So, when they see one, they want to collapse it immediately. Well, the problem is, with a stiff top hat, that doesn’t work. It will just damage it. Remember that these can be really expensive and hard to find. So, never just bang your head on a top head, assuming it’s a chapeau claque.

French Minister in Top Hats
French Minister in Top Hats

The way a chapeau claque works is that it has coils on the inside. But, over time, they may not be as springy as they once used to be. By 1910, top hats were more widely worn in Europe and not so much in the US anymore. Modern-produced top hats are often made from wool felt and are just a shadow of what top hats used to be. If you wear one, get a vintage one because the modern stuff is just not up to snuff. 

Bowler Hat

Basically, the bowler hat is a round fur felt hat that is typically hard. That being said, it could also be found in softer, more fashion-forward versions. Just like a top hat, it has a nice brim-curled edge. Modern bowler hats don’t have them anymore.

Raphael and Preston wearing bowler hats
Bowler hats are still popular today–and we enjoy wearing them!
Double Sided Wool Silk Scarf in Brown, Burgundy, Red, Blue Paisley with Geometric Pattern

Fort Belvedere

Double Sided Wool Silk Scarf in Brown, Burgundy, Red, Blue Paisley with Geometric Pattern

Double Sided Wool Silk Scarf in Brown, Navy, & Blue Paisley with Geometric Pattern - Fort Belvedere

Fort Belvedere

Double Sided Wool Silk Scarf in Brown, Navy, & Blue Paisley with Geometric Pattern – Fort Belvedere

Blue Cornflower Boutonniere Buttonhole Flower Silk Fort Belvedere

Fort Belvedere

Blue Cornflower Boutonniere Buttonhole Flower Silk Fort Belvedere

Despite being invented in 1849, the bowler hat saw a surge in popularity and was quite popular during the 1910s. Unlike a top hat, a bowler hat was truly worn by men of all classes.

Boater Hat

Another popular hat of the 1910s was the boater hat, which is a stiff straw hat made of braided sennit with a flat top. Some people also call it the “flat telescope crown.”

Preston wearing a straw boater to complete his black-tie look
Preston wearing a straw boater to complete his black-tie look.
A plain white linen pocket square on a white background

Fort Belvedere

White Linen Pocket Square with Handrolled Edges made in Italy – Fort Belvedere

Dark Red Carnation Boutonniere Life Size Lapel Flower - Fort Belvedere

Fort Belvedere

Dark Red Carnation Boutonniere Life Size Lapel Flower – Fort Belvedere

Black Butterfly Bow Tie in Silk Satin Sized and Self-Tie - Fort Belvedere

Fort Belvedere

Black Butterfly Bow Tie in Silk Satin Sized and Self-Tie – Fort Belvedere

Historically, on Straw Hat Day occurring in May, men started wearing their boaters, and, on Felt Hat Day in September, they would switch back to fur felt hats. Eventually, that led to the Straw Hat Riot of 1922, which involved more than a thousand men in a brawl. You can learn more about this historical event and the hat itself in our in-depth boater guide.

Panama Hat

If you flip through vintage photos from the 1910s, chances are you’ll come across some Panama hats as well. They were popular because they were lighter and not as stiff as the boater hat. And, even though the name may imply otherwise, a Panama hat is actually made in Ecuador by hand from the straw of the toquilla palm tree.

Theodore Roosevelt returning from the Panama Canal Construction
Theodore Roosevelt returning from the Panama Canal Construction

So, why is it called Panama hat, then? Theodore Roosevelt returned from the Panama Canal construction, and the newspapers called it the “Panama hat” because he was wearing this summery straw hat. Because of that, the Panama hat has been cemented in our brains and the lexicon of the world.

Homburg

Another popular hat of the 1910s – and in some way, shape, or form a precursor to the fedora – was the Homburg hat named after the German town of Bad Homburg. Even though it had a brim curl like the bowler hat, it was a lot softer and made out of fur felt.

When in black, it was rather formal, but you could also get it in dove gray or brown, whereas bowler hats were mostly black.

Homburgs have stiffed curled brims and grosgrain bands.
Homburgs have stiffed curled brims and grosgrain bands.

The hat was popularized by future king Edward VII when he returned to England in the 1890s from a trip from Bad Homburg in Germany. Hence, the name Homburg.

Fedora

Interestingly, the fedora hat found its origins in 1882, and it was originally designed for women. That got its name after it was first worn in a play by the same name, written by Victorien Sardou. Interestingly, fashion-forwarded men like Oscar Wilde were seen wearing that same hat that same very year.

Oscar Wilde wearing a fedora hat
Oscar Wilde wearing a fedora hat

As you know, Oscar Wilde was a famous foppish dandy, and so, the fedora wouldn’t really gain mainstream popularity with men until the 1920s. But – and that’s why it’s part of this guide – it was worn by fashionable gentlemen in the 1910s in the US.

The Flat Cap

Last but not least is the flat cap, which was probably the most casual headwear of the era. If you’re an upper or middle-class man, you’d likely wear this hat for casual days or sporting events. On the flip side, this would have been their number one choice of headwear for most working-class men.

The flat cap is often associated with the working class.
The flat cap is often associated with the working class.

Contrary to what popular dramas like The Peaky Blinders make you believe, the one-piece flat cap was the most popular style at the time. It was wide, had a round pancake shape, and a peak in the front. It almost looked like a beret.

Glasses and Eyewear (Spectacles and Monocles)

Moving further down from the hat, we’ll reach glasses and eyewear. In 1910, eyewear was more varied than it is today. And by that, I don’t mean they had more frame colors and frame styles, but there were just different types of eyewear that were acceptable to wear in public.

Wired spectacles of the 1910s
Wired spectacles of the 1910s

Spectacles were, of course, in popular use. While the wired versions were also still popular, horn or framed versions started to pick up in popularity.

Apart from that, men could choose from many different types of monocles. Some came with a chain, some without, for the left, for the right eye. Overall, it was a very upper-class look, but still, men from the upper and middle-class wore it, and the lower classes.

A pince-nez or a pinch nose style glasses.
A “pince-nez”or a pinched nose style is a spectacle worn with a nose clip instead of earpieces and is often hooked to a chain.

Apart from them, men could wear a pince-nez, which is French for “pinched nose,” which stems from the fact that you pinch this eyewear to your nose. Famous men who wore it include Franklin D. Roosevelt and Theodore Roosevelt.

Shirts (and Their Collars & Cuffs)

Today, most men associate a dress shirt with an attached collar, attached sleeves, and cuffs. In the 1820s, someone had the idea to have detachable collars and cuffs to save on laundry cost and time because back then, collars and cuffs were heavily starched. Also, a man would never take off his jacket, and so you never really see the body of his shirt, but just the cuffs and the collar.

Grafton Starched Detachable Wing Collar
Grafton Starched Detachable Wing Collar

This fashion persisted in the 1910s, and you would attach the collar with collar studs; a wider one in the front because you have four layers of fabric, a slimmer one in the back because you have just two layers of fabric. Not only were the collars at the time starched and stiff, but they were also much taller than they are today.

You could find wing collars, standing collars, rounded club collars, or kind of square collars. The variety was much wider than it is today. Most collars had a much smaller spread, which meant you couldn’t see much of the tie knot and had a very different look than more spread or cutaway collars today.

Fort Belvedere Collar Bars, Clips, and Pins
Fort Belvedere Collar Bars, Clips, and Pins
Collar Bar Clip in Platinum Silver For Classic Narrow Spread Collars by Fort Belvedere

Fort Belvedere

Collar Bar Clip in Platinum Silver For Classic Narrow Spread Collars by Fort Belvedere

Collar Bar with Ball End in Silver by Fort Belvedere

Fort Belvedere

Collar Bar with Ball End in Silver by Fort Belvedere

Collar Pin Safety Pin Silver Fort Belvedere

Fort Belvedere

Collar Pin Safety Pin Silver Fort Belvedere

Collar Bar Clip in Yellow Gold For Classic Narrow Spread Collars by Fort Belvedere

Fort Belvedere

Collar Bar Clip in Yellow Gold For Classic Narrow Spread Collars by Fort Belvedere

Collar Pin Hexagonal End Gold Fort Belvedere

Fort Belvedere

Collar Pin Hexagonal End Gold Fort Belvedere

Collar Pin Safety Pin Gold from Fort Belvedere

Fort Belvedere

Collar Pin Safety Pin Gold Fort Belvedere

Also, you could find soft collars that were detachable if you didn’t like that stiff look and feel that had to be laundered and maintained more frequently. Of course, different shirt makers came up with different inventions, and so, you don’t always see shirt studs, but sometimes, also tabs that were sewn into the collar. Others attached them with pins or collar bars.

If you’re inspired by the collar bar look, take a look at our shop, where we have a selection of collar pins and bars that give you that look even though you might not have a detachable collar shirt. If you want one of those, there’s legal outfitter Stanley Ley that still offers them, or you can get them made bespoke.

Stanley Ley Website
Stanley Ley Website

If bespoke is outside your budget, you can check out a video on the Antique Menswear YouTube channel, where you can see how you can make a detachable collar shirt from a widely available regular shirt today with a little bit of work.

The star of that channel is Aaron White, a gentleman who dresses in Edwardian fashion every day; Aaron is also a scriptwriter for us here at the Gentleman’s Gazette and did the research for this article. Thanks, Aaron!

1910s shirts were longer as they were worn as undergarments.
1910s shirts were longer as they were worn as undergarments.

At this time, a shirt was strictly an undergarment and, because of that, it was much longer in the tails and the front, so it would be tucked in and around your legs so it wouldn’t come undone. It was also meant to protect your more expensive outer layers from bodily fluids and sweat.

Shirts back then came in a wide array of colors and patterns, but striped shirts were really popular because they didn’t pick up the dirt as quickly as plain white shirts did. Some shirts had a simple barrel cuff with buttons; others had French cuffs or single cuffs for cufflinks.

Detachable Shirt Cuffs
Detachable Shirt Cuffs

Even though detachable starched cuffs were still around at the time, they were about to be phased out. And while the detachable collar survived a little longer, the detachable cuffs weren’t as widely used anymore.

If you think about it, most of your shirts will likely wear out in the collar or the cuffs. So, being able to simply have another set of cuffs or collars really expands the lifetime of your shirt. 

Gold Cufflinks with Chains
Gold Cufflinks with Chains

While we’re talking about cuffs, gold and silver cufflinks in smaller oval shapes with chains and a motif on both sides were popular back then. You didn’t see T-bar closure cufflinks or other cufflinks. Maybe snap buttons, but it became a little more popular later on in the 20s.

Not many men wear bold colors for their cufflinks, except maybe for evening wear, where you could also see the introduction of precious stones.

Ties (Varying Styles, but Shorter Overall)

The ties of the day definitely varied from the ones sold today. First of all, they were shorter, wider, much thinner. Sometimes, they were called scarves, not necessarily ties or neckties, and the knot was typically rather small, which makes sense because the interlining wasn’t very thick, and the spread of the collar was very narrow.

Ties came in a variety of patterns, such as checks, stripes, and geometric patterns. Likewise, thin woven ties were in fashion. They were often striped and tightly knotted. In terms of materials, you could find silk, wool, or cotton.

1910s Neckwear
1910s Neckwear

Due to, on average, much higher waistband of trousers and the higher closing waistcoats men would wear, the length of the tie was considerably shorter, sometimes just reaching 10 inches below the shirt collar. Even when it became more popular later on to go without a waistcoat, the ties remained short at first and would rarely reach the belly button.

Today, it’s all different, of course, and ties are longer, but we still have a different rise with our trousers, and different people need different size ties. And because of that, at Fort Belvedere, we offer our ties in three different lengths: short, regular, and long.

At Fort Belvedere, our Three-Fold Ties Come in Three Lengths
At Fort Belvedere, our Three-Fold Ties Come in Three Lengths

That being said, bow ties and cravats were also popular at the time and worn by fashionable men. Of course, the exact shapes and sizes varied.

Waistcoats/Vests (Cut Higher than Today)

Back in 1910, they were typically quite a bit shorter because, again, trousers or pants had a much higher rise, and the goal was just to cover the waistband. As such, the waist typically stopped at your natural waist and would not go past your hips.

Black Waistcoat with A Cinch Belt in the Back
Black Waistcoat with A Cinch Belt in the Back

Most waistcoats were made out of heavier wool and sometimes lined with silk as it was thinner, and it had a cinch-belt in the back, very much like waistcoats today. Fabrics were a lot heavier than they are today, and only the rich at the time could afford fancy silks for their waistcoat backings.

Specifically, in the 1910s, the neckline of your waistcoat was much higher, so less of the shirt and the tie were exposed. And therefore, the ties, again, were shorter. However, as belts became more popular, people dared to skip the waistcoat and let their tie that was quite short dangle freely.

Jackets (Differences in Construction, Quality, and Style)

During that period, mass production, especially in the US, was normal. The average factory suit in 1910 was of much better quality than it is today. There were no glued canvases. It was all a proper, interlined, sewn canvas. Even though machines were used back then and things like the pad stitching were all machine-made, the quality was still superior to most suits today.

The most popular material for suits was probably wool, but you could also find linen and cotton suits. The fabric could be woven in many different ways, and even though the finishing wasn’t as good as it is today, you found a lot more fanciful weaves and textures, and patterns than you can today.

Suits in the 1910s
Suits in the 1910s

Jackets would typically be lined in silk, with the high wear areas, such as the sleeves, are lined in cotton. The lounge suit was popular and became the origin of today’s business suit.

Before 1910, combinations or mixed-matched outfits had been more popular. In 1910, the suit, which comes in the French term suivre meaning “to follow,” was more popular. To learn more about the history of the suit throughout the decades, our detailed suit timeline has you covered.

Sven Raphael Schneider in Three Piece Suit with double breasted waistcoat
Sven Raphael Schneider wearing a suit jacket with its natural partners: a waistcoat and trousers of the same fabric

In the US, boxier cuts were coming into favor, and so were suits without the front dart, also known as the “sack suit.” You can also see straight-front jackets now, compared to the more cutaway jackets in previous decades. Today, suits typically have a more cutaway front.

In the 1910s, the silhouette of the jacket became wider and straighter compared to decades previously. Even though they also had sack suits in Europe, the American version was typically cut wider and straighter.

1900s vs. 1910s Jackets
1900s vs. 1910s Jackets

We’re not saying that men wear baggy suits then, but they just weren’t as contoured to the body as body coats were, such as a White Tie tailcoat or a morning coat. If you look at the suit fashions a decade earlier, you would also see much more contoured body coats that were not morning coats or tailcoats.

Stylistically, the jackets in 1910 typically had three or four single-breasted buttons in the front and two or three cuff buttons with considerably wider spacing than you would see on a suit jacket today. Likewise, double-breasted jackets were popular, but they had slimmer lapels and came in a 6-2 or 6-4 button configuration.

Mid-1910s suit were more form-fitting.
Mid-1910s suits were more form-fitting.

Also, the neckline on those double-breasted jackets was higher, and, just like with the waistcoat, you would see less of the front of the suit than you would in a double-breasted suit today.

During the mid-1910s, more slender form-fitting jackets were introduced that were popular with younger men. Towards the end of the 1910s, you could see two-button jackets versus, previously, the three or four-button jackets.

Trousers (Higher Rise, Tapered Fit)

So, what did regular trousers look like in 1910? Today, for most men, it’s a pair of jeans. Well, back then, men wore what you would today call a pair of dress pants or dress trousers. Typically, they had a high rise that would be about an inch or two and a half, three centimeters above your belly button or natural waistline.

Trousers back then were typically tapered.
Trousers back then were typically tapered.

Interestingly, this style of rise was worn by every man, no matter their weight or size. Most men in 1910 would still wear suspenders versus belts. In the 1900s, you had mostly fishtail backs versus, by the 1910s in the US, you had more straight backs. In Europe, fishtail back trousers were likely still more popular.

If you look at a pair of straight-cut trousers from 2020, they’re really perfectly straight on top. In the 1910s, they really rose a little bit in the back to make it more comfortable to wear them with suspenders. Some even had little straps that would elevate the button, so if you wear suspenders, they would just hang better. The whole idea of fishtail back trousers is comfort for the wearer.

Trouser with A Fishtail Back
Trouser with A Fishtail Back

Most trousers would also have cinch backs, not so much side adjusters, but even without a pair of suspenders, you could keep it tightly on your waist.

Belts became popular a lot earlier in the US, and so, you can find more straight-cut belted trousers in the US from 1910 than you would in Europe. One thing that was identical across the ponds was that there were no pleats, and pants were flat-fronted.

Flat-fronted pants were popular across America and Europe in the 10s.
Flat-fronted pants were popular across America and Europe in the 10s.

Typically, 1910 trousers featured a more narrow leg that tapered down towards the cuff, very similar to what we see in modern fashion. Only more formal trousers were typically cut a little bigger, and if you go later in the 1930s, trousers got a lot wider, and pleats were added.

Cuffs, or turn-ups, as the British say, were also popular at the time but by no means mandatory. In terms of length, you didn’t see a big break in the trousers because they were narrow towards the shoe, and so, they were mostly ankle length.

Trousers with Cuffs (or Turn-Ups)
Trousers with Cuffs (or Turn-Ups)

Shoes and Boots (Higher Heels, More Details)

Speaking of ankles, then, what did a 1910 gentleman wear on his feet? Very clearly, rules ruled the day back then. Balmoral boots that were laced high above the ankle were popular for men, so were button boots and Chelsea boots.

1910s Boots
1910s Boots

The average man would still have to be transported by horse or carriage. This speaks a lot to the conditions the streets were in during that era. Even though new technologies for mass transport had been invented, the horse was still quite important. As a consequence, there was a lot of horse manure on the streets.

Men on average had smaller feet back then, and shoes or boots were typically narrower. They also had a much higher heel, and the stitching was a lot finer. If there was any broguing, it was finer and smaller than what you’d expect today from a boot.

Shoes at the time had higher heels.
Shoes at the time had higher heels.

When you watch period dramas, the boots or the shoes typically give it away because they hardly ever get the heel height right. Typically, it’s too short and more modern. Why is it the case? Well, maybe it’s not in the budget, or they decide that people don’t notice or they simply don’t know about it.

Accessories (More Intricate than Today)

In terms of accessories, the most popular ones in 1910 were probably the pocket watch, the walking cane, a tie stick pin, and, of course, watch chains.

Pocket Watch Guide

Older watch chains were put in with a T-bar to the middle of your waistcoat, and then, you had the pocket watch on one side and a pencil or a fob on the other side. Stick pins were more decorative but could help to pin your necktie to your shirt.

What Men Wore For Special Events

Even though the tuxedo was around since the 1860s for formal wear, proper White Tie was likely still the number one choice in 1910. Later on, the tuxedo would become more popular, especially in the US. But, if you’re interested in the history of Black Tie and White Tie, you can take a look at the world’s most comprehensive guide.

Formal White Tie was worn for special events.
Formal White Tie was worn for special events.

Outfit Rundown

I wish I could say I had a true 1910s outfit but, unfortunately, I don’t. I’m six foot tall or about 183 centimeters and over 200 pounds heavy, approaching 90 kilograms, and simply, it’s really hard to find clothing that fits a man of my stature. Plus, I typically run hot and those fabrics back then were a lot hotter and were warmer. Also, I’m not a period dresser.

Raphael wearing a black suit jacket, an off-white vest, gray trousers, button boots, and a black bowler hat.
Raphael wearing a 1910s inspired look
A plain white linen pocket square on a white background

Fort Belvedere

White Linen Pocket Square with Handrolled Edges made in Italy – Fort Belvedere

Madder Silk Tie in Bottle Green Macclesfield Neats Blue Orange Pattern - Fort Belvedere

Fort Belvedere

Madder Silk Tie in Bottle Green Macclesfield Neats Blue Orange Pattern – Fort Belvedere

Black & White Two-Tone Solid Formal Evening Socks for Black Tie & White Tie - Fort Belvedere

Fort Belvedere

Black & White Two-Tone Solid Formal Evening Socks for Black Tie & White Tie – Fort Belvedere

I always believe I live in the here and now and I’m just inspired by the past. That being said, I try to dress in the spirit of the 1910s, starting with a black bowler hat. It’s a vintage piece and has a nice brim curl. My shirt has, stylistically, very much in common with shirts from 1910s.

But, it’s an attached collar. It is a club collar. But, it doesn’t have the same look as a vintage detachable collar. My tie is also not a true 1910s tie. It’s too long and it’s slightly too thick, but it’s a simple four-in-hand knot. My waistcoat is double-breasted and modern, but stylistically very close to the 1910s. It could be maybe cut a little higher with a little less shirt showing.

It also has that little buttonhole in the middle that you can use for your pocket watch chain, so it hangs right, decoratively, in the middle. My jacket features no vents just like they would back in 1910, but it’s not a 1910 jacket. I guess it’s more from the 40s. Even though my jacket has the black color of the era and the right cuff button spacing, it is a little younger than from the 1910s.

All my pants are pleated and so is this pair of pants. Stylistically, though, it has that kind of shadow stripe and a rich, deep fabric. Lengthwise, it’s about right, but it’s a little too wide in the ankle. It should be slimmer and have no pleats.

My socks are modern from Fort Belvedere and you can find them in our shop, just like the white pocket square I’m wearing. The cuffs on my shirt are also attached and I chose a pair of vintage double-sided oval cufflinks with a bit of enamel color. I couldn’t quite tell when they came out, maybe the 20s, but you could have seen something like that in the 1910s, too. Again, solid gold and silver was probably more popular.

In terms of footwear, I’m wearing a pair of button boots, which is very vintage-inspired and definitely gives me the look, especially if I wear it with a cane and a bowler hat in this entire outfit. That being said, the heel height is more modern and not high enough for a vintage 1910s boot. The two-tone look in off-white and black, the buttons, and the quarter broguing is definitely something you would have seen in an older boot, though.

What’s the most interesting fact about menswear in the 1910s? Would you like us to tackle other decades as well? Let us know in the comments!

Reader Comments

  1. I think that the only hats you can get away with now without looking a fool are flat caps (country) and panama (in the summer). Maybe hunting hats if hunting or a top hat if at a very grand wedding. Even back in the 1950s Jack Lemmon looked an idiot in his “junior executive” bowler hat in ‘The Apartment’ and it was only in the movie as a joke.

    1. Mostly agreed. Flat caps are good for ALMOST anything, and Panamas are fantastic in the summer. If a man’s face works with it, a fedora can also be quite nice for practical reasons (much like the Panama). I can maybe see some leeway for homburgs and bowlers in certain circles (needing a hat for cocktail attire or black tie, for instance), and your example for top hats, but that’s about it. Anything else is a bit suspect unless part of a costume.

  2. In countries with hot climate a boater hat is quite appropriate. I wear it with a white two-piece suit and the feedback from the locals is very positive.

  3. Two things I find interesting:
    Given the long history of the pocket square, it’s a bit of a hit or miss in the old photos/catalogs whether the gentlemen wear them in the breast pocket or not (though jump forward to the 20’s/30’s, and they seem to sport them more often than not). Also, they don’t seem to have had an obsession over jacket sleeve length in those days. Sometimes they show a bit of shirt cuff, sometimes not, and this seems to continue in the following decades as well. I guess it’s because they didn’t have the internet to point these things out? While I do always rock the square, I’ve become a bit less obsessive about my sleeve length after noticing this.

    1. Back in the day (1980’s) I went to Brooks Brothers for a seersucker suit. The tailor asked how long I wanted the sleeves of the suit jacket. Although I had a few ready to wear suits in my closet, the sleeve length was never addressed before while being fitted. The BB tailor said one quarter inch of sleeve revealed was acceptable for an American, but if I was European one half inch was the usual reveal. My point is that one can always rely on an old time tailor for advice rather than the internet where everyone has an opinion.

      1. I know several guys that go the shorter half-inch route due to a preference for French cuffs and wanting to show off the cufflinks. My guy leans towards a tad longer sleeve, particularly on more casual jackets (perhaps on the off-chance I want to wear short sleeves under the seersucker at some point). I used to be a violinist/violist, so I’m used to having them slightly longer anyway.

        Back to the original concept of the thread, it is unfortunate that we don’t have the same availability of the heavier suitings these days. The tailoring combined with the heavier cloth makes for some very nice-looking suits.

        It’s also a shame that the unique and intricate accessories have become largely non-existent, largely being replaced by a thin, characterless black plastic brick or cheaply-made mass-produced facsimiles.

  4. Anyone wearing a bowler out today, would also quickly wear out their welcome.

  5. I really liked the timing of your comments that the Fedora started as a women’s hat and Oscar Wilde wore one. I’m sure he would have laughed at that comment. So, serious question. In the old film noir movies are guys like Bogart wearing fedoras ? Just curious

  6. One reason hats aren’t as practical today is that most restaurants and nightclubs do not have hat-check girls! Having dinner or sitting on a barstool with a fedora balanced on your knee can convince you to leave the big hat at home. Now I wear a flat hat, or a Persian lamb karakul in the winter. Either can be folded up and slipped into a side pocket of my coat or jacket. And if casual I wear a ball cap; if I don’t have a jacket on and want to take my ball cap of I slide the brim into my back waistband – as a plus I never leave a cap behind because it’s on my behind.

Comments are closed.